auto.du-reviews.com

Product Features:

• Double DIN keys sold in set of four
• Fit all mk4 double din radio/CD players (both monsoon & premium)
• Fit Touareg radios & many Audi double DIN radios
• (2 Pair) Needed for the proper removal of radio.
• Applicable: Audi and VW models, ’98+.

Car Stereo Release keys used for removing VW, Audi Horizontal & Mercedes Factory Fit head units from your vehicle to allow installation of an aftermarket / replacement car audio head unit

Price: $ 9.99

Product Features:

• EU DIN or Double DIN Radio Removal Stereo Keys
• Some Models may require 4 keys THIS IS FOR A SET OF FOUR KEYS
• will work for Audi, VW, Ford, Mercedes, Porsche

EU DIN or Double DIN Radio Removal Stereo Keys key tools set
will work for following brands
Audi, VW, Ford, Mercedes, Porsche
1-Audi 1996 and up, Works for RNS, Navi Plus , Concert, Chorus & Symphony Units
2-Beta , Gamma, And Delta Units Some Models may require 4 keys THIS IS FOR A SET OF FOUR KEYS
3-Ford Focus 2005 & UP
4-VW 1996 and up
5-Mercedes 1992 and up
6-Porsche MOST MODELS, any CR or CDR radio in a Boxster or 911.

Price: $ 9.98

Product Features:

• Complete Security System
• Extraction
• Applications On Select Vehicles: 1992-Up Mercedes, 1996-Up Audi & 1996-Up Volkswagen

Removing a factory radio can be a difficult task, but Scosche has made it simple with its radio removal tool. This tool works with select vehicles: 1992-up Mercedes, 1996-up Audi & 1996-up Volkswagen.

Price: $ 1.89

Product Features:

• Insert tools into holes on radio for easy removal
• Designed to not damage vehicle or dash
• 1991-current Explorer and 1995-current Windstar
• Same as Ford No. T87P-19061-A

The OTC Ford radio removal tool is easy to use just insert tools into the holes on the radio face plate to release the retaining clips, then use them as a handle to pull the radio from the instrument panel.

“OTC 7575 Ford Radio Removal Tool” Reviews:

Review by William H. Bray
Rate:
Ford is quite annoying for requiring these tools to get your stereo out, but thats not the point. I tried using coat hangers to pull out the stereo, but had no luck with that. With these, just popped them in and the stereo came right out. Quite easy to use.

Review by Michael Gerbasi
Rate:
I’ve had to remove the radio from my Windstar twice, and twice I’ve used these tools. Just push into the holes (about three quarters on an inch in) and apply pressure out to the sides of the radio. Then slowly pull towards you. Takes a little practice, but radio comes out.

Review by Richard L. Bowman
Rate:
Great tool does what it made for no problems at all to remove my radio. Money well spent as easy as 1,2,3 your done.

Overall Rating: (out of 4 reviews)

Price: $ 6.25

Product Features:

• 16-pin OBDII standard socket which works with VW, Audi, and Skoda
• Performs continuous DTC scan
• Reads and erases Diagnostic Trouble Codes (DTCs) of Engine, ABS, Airbags and Automatic Transmission
• User manual contains VW/AUDI Diagnostic Trouble Code Definitions
• One-year warranty

The U280 is great for DIYers. With a U280, you can quickly scan your engine to find trouble codes on electronically controlled systems on your car. Simply connect the scanner using the OBDII diagnostic socket on your Audi, VW, or Skoda, read the trouble code (DTC) shown on U280, and identify and locate the causes of the trouble codes using the user manual which contains a decoder for the DTCs.

“UIF-U280 VW and Audi OBDII Scan Tool” Reviews:

Review by P. Schmidt
Rate:
Bought this when I found I had an alternative to VAG software that would only run on PC’s and the expensive cable to connect to the VW’s port.

For the price its great.

I’m not a mechanic but it helps me determine if that CEL is something I need to take care of immediately, or its the simple ‘gas cap’ warning.

Buy it, keep it in your VW/Audi.

Review by Osorio Batres Silvia Rebeca
Rate:
I have tried this scanner on all types of volkswagens and it will read them all no matter where they are made. This is not like other scan tools which can only read vw made for the US market only.

Review by Colin Mullins-Zugelder
Rate:
The scanner functions well & helps me diagnose & clear codes from my ’01 Beetle.

The literature that it came with is insufficient at best. It didn’t include all of the codes & the step-by-step instructions didn’t match the commands programmed into the machine.

I figured it out & googled the missing codes, but that was a little concerning. The literature reads like it’s written by someone who’s not a native English speaker.

I would still recommend the product for the price & the ability.

Overall Rating: (out of 8 reviews)

Price: $ 25.00