Product Features:
- Aftermarket Radio / Stereo Installation Wire Harness
- Connection of Wire is Plug N Play – Plugs directly into vehicle harness (no cutting or splicing)
- Professional wiring harness (EIA color coded to match the aftermarket wiring)
- IF YOU CURRENT CAR RADIO STAYS ON AFTER THE KEY IS REMOVED (BEFORE DOOR IS OPENED) THIS HARNESS WILL NOT WORK PROPERLY
AFTERMARKET RADIO / STEREO INSTALLATION WIRE HARNESS — CONNECTS DIRECTLY INTO VEHICLE HARNESS — AVOIDS CUTTING INTO CAR HARNESS FOR PROFESSIONAL RESULTS — (THIS HARNESS IS DESIGNED ONLY FOR STANDARD / NO PREMIUM / NON FACTORY AMPLIFIED SYSTEMS) — (NOT COMPATIBLE WITH ONSTAR, SYNC, RAP FEATURES OR CAN BUS SYSTEMS – SPECIALTY PREMIUM HARNESSES AVAILABLE) -
Price: $ 5.99
Categories: SUZUKI Tags: 2005, 2006, Harness, installation, Parts, Radio, Reno, Stereo, Suzuki, Wire, Wiring
Product Features:
radio removal tool
“METRA Ltd 86-5618 ford Radio Removal Keys” Reviews:
Review by DDW_AZ
Rate: 
Insert each key into holes on either side of radio to a depth of 1.5 inches
Press both Keys outwards( away ) from radio.
Slide radio out of bracket
Review by Dietrich H. Hertel
Rate:
Metra products do what they’re supposed to do. All instructions were clear. Buy Metra for a nice clean installation.
These keys make the job a lot easier than attempting to make your own.
Overall Rating: (out of 2 reviews)
Price: $ 2.80
September 4th, 2010
admin
Product Features:
- METRA Audi/Volkswagen 1993-2004 Amp Integration Turbowire Harness 701787
Metra radio wiring harness for VW/AUDI BOSE INTEGRATION 96-UP
“Metra 70-1787 Radio Wiring Harness for VW/Audi Bose Integration 98-Up” Reviews:
Review by Spire
Rate: 
I purchased this item for my 2000 audi A6 with bose stereo so i could install a pioneer head unit. when installed as directed, the speakers all emitted a high pitched alternator whine whether i was listening to the stereo or a cd. i knew the HU worked properly, and so did the factory stereo, so i checked the harness for possible fixes. i found no unwanted noises came through the speaker when, instead of hooking the rca adapters (on the harness) up to the preamp outputs (on the HU), i hooked the speaker level outputs (on the stereo) to the rca adapters (on the harness). so to fix the problem, i cut the RCA adapters off the harness, and soldered those wires directly to the speaker level outputs from the HU. now everything works and sounds great. I must admit, i expected more from metra. also – if you upgrade stereos, remember to get an antenna amplifier – audi doesn’t use whip antenna’s,and chances are your radio won’t amplify the signal enough (even in the city).
Overall Rating: (out of 1 reviews)
Price: $ 5.20
Product Features:
- Plugs into car harness at radio
- Power and 4/speaker
- 16-pin plug
Ford/Lincoln/Mazda 1998-Up into Car 16 pin. Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed.
“Metra 70-1771 Radio Wiring Harness for Ford/Lincoln/Mazda 1998-Up into Car, 16 Pin” Reviews:
Review by J. T. Marrs
Rate:
I soldered 11 leads from my new hu to this connector, connected to truck’s harness and powered up. Simple and quick install.
Review by shanedonna
Rate:
Purchased for use in my 2000 Mercury Villager. Made it so much easier to install after market stereo. Having done it the hard way in the past, this was wonderful! Highly recommend!
Review by MGB
Rate: 
I picked this harness up for an installation on a 2003 Ford F-150. It was easy to install but the instructions do have the “dimmer” wire labeled as Orange/White when it was Orange/Black on this harness. Most people will not use that wire anyway; the orange wire in the harness labeled “illumination” is the one most people will use. For most aftermarket stereos it’s just a matter of matching the wires on this harness to the same color wires on your stereo’s harness. It can’t get much easier than that…
The Good:
Easy to install
Good quality
Price
The Bad:
One mislabeled wire in the instructions
Overall Rating: 
(out of 3 reviews)
Price: $ 0.99
Product Features:
- Aftermarket Radio / Stereo Installation Wire Harness
- Connection of Wire is Plug N Play – Plugs directly into vehicle harness (no cutting or splicing)
- Professional wiring harness (EIA color coded to match the aftermarket wiring)
- IF YOU CURRENT CAR RADIO STAYS ON AFTER THE KEY IS REMOVED (BEFORE DOOR IS OPENED) THIS HARNESS WILL NOT WORK PROPERLY
AFTERMARKET RADIO / STEREO INSTALLATION WIRE HARNESS — CONNECTS DIRECTLY INTO VEHICLE HARNESS — AVOIDS CUTTING INTO CAR HARNESS FOR PROFESSIONAL RESULTS — (THIS HARNESS IS DESIGNED ONLY FOR STANDARD / NO PREMIUM / NON FACTORY AMPLIFIED SYSTEMS) — (NOT COMPATIBLE WITH ONSTAR, SYNC, RAP FEATURES OR CAN BUS SYSTEMS – SPECIALTY PREMIUM HARNESSES AVAILABLE) -
Price: $ 5.99
